EnglishEnglish
Fiber Optic Cable Stripper

Contact Us

Share to:

Fiber Optic Cable Stripper

 
Product Name: Air-blowing Micro Cable
Fiber Type: Singlemode,Multimode,om1,om2,om3
Fiber Count: 2-24 Core
Outer Sheath Material: PE,HDPE,MDPE,LSZH
Applications: Reconstruction of old power lines and low voltage level lines. Coastal chemical industrial areas with heavy chemical pollution
Applicable Voltage Range: Power lines with voltage level of 220KV and below


Fiber Optic Stripping Tool FO103-S


Description

  • The use of temperature is -20 ° C ~ 50 °C

  • Factory pre-set, no need to adjust this stripper again to prevent fiber scratch;

  • Cutting blade precision positioning, quenching and tempering treatment, anti-rust primer.


Application

  • Model FO103-S is for stripping 125um coating from 250um optical fiber

  • Precise hole&V-opening allow for accurate buffer coating removal

  • Factory set, requires no adjustment

  • Prevents scratching or nicking of optical fiber

  • Additional models and sizes available upon request.

  • Comfort-grip, ergonomic handles

  • Lock to hold tool closed when it is not in use



Fiber Optic Stripper CFS-2


Describtion

  • The use of temperature is -20 ° C ~ 50 °C

  • Factory pre-set, no need to adjust this stripper again to prevent fiber scratch; Cutting blade precision positioning, quenching and tempering treatment, anti-rust primer.

  • if not use, set the blade lock in the closed state.


Feature

  • For stripping 250 micron buffer coating to expose 125 micron cladded fiber

  • Second hole for stripping 2-3mm fiber jackets

  • 140 μm diameter hole and V-opening in blade allows removal of 250 micron buffer coating from 125 micron fiber

  • Pre-set at the factory - no adjustments needed

  • Will not scratch or nick glass fiber

  • All stripping surfaces are manufactured to precise tolerances to assure clean, smooth strips



Fiber Optic Stripper WB-S-01


Description

  • The use of temperature is -20 ° C ~ 50 °C

  • Factory pre-set, no need to adjust this stripper again to prevent fiber scratch; Cutting blade recision positioning, quenching and tempering treatment, anti-rust primer.

  • if not use, set the blade lock in the closed state.


Feature

  • For stripping 250 micron buffer coating to expose 125 micron cladded fiber

  • Second hole for stripping 2-3mm fiber jackets

  • 140 μm diameter hole and V-opening in blade allows removal of 250 micron buffer coating from 125 micron fiber

  • Pre-set at the factory - no adjustments needed

  • Will not scratch or nick glass fiber

  • All stripping surfaces are manufactured to precise tolerances to assure clean, smooth strips

  • Comfort-grip, ergonomic handles

  • Lock to hold tool closed when it is not in use



Fiber Optic Stripping Tool F11301T


Description

  • The use of temperature is -20 ° C ~ 50 °C

  • Factory pre-set, no need to adjust this stripper again to prevent fiber scratch;

  • Cutting blade precision positioning, quenching and tempering treatment, anti-rust primer.

 

Application

  • For stripping 250 micron buffer coating ,to expose 125 micron cladded fiber 

  • First hole for stripping 2-3mm fiber jackets 

  • Send hole to removal of 250 micron buffer coating from 125 micron fiber 

  • Third hole to strip the 125um glass fiber

 

Feature

  • Pre-set at the factory 

  • no adjustments needed 

  • Will not scratch or nick glass fiber 

  • All stripping surfaces are manufactured to precise tolerances to assure clean, smooth strips 

  • Comfort-grip, ergonomic handles 

  • Lock to hold tool closed when it is not in use 



Across and Lengthwise Fiber Optic Cable sheath Stripper TTC10A


Description

TTC10A Across and Lengthwise Fiber Cable Stripper is our patent hand tool, used for stripping the sheath of optical cable. TTC10A is the upgrade type fiber optic cable stripper, and it has both function of the TTC10 and TTC15, which means TTC10A can do both across and lengthwise stripping.

 

Operating Method

It uses ratchet wheel dial knob to operate, so that the first-time stripped cable has the symmetry hatches on both sides, as we know, the Side Fiber Cable Ripper must strip twice in the Optical Cut-over with Service process, TTC10A overcomes this shortage. It is portable, compact, easy to operate, timesaving; the cut-in depth can be accommodated and can strip at any part of the fiber cable.

 

Cutting Range

It can do one-off strip for the fiber cable Ø10~Ø30mm. It is an absolutely necessary tool for the quality guaranteeingand the safety in the fiber cable construction, especially in optical cable stripping for the Optical Cable Cut-over with Service


GET IN TOUCH

We generally work within a 100 mile radius of our main office . Please call us with your location to see if we can help you.

Leave Message

A hi-tech enterprise having a self-owned brand and specializing in the R&D, manufacture and sales of fiber optical communications equipment.

QUICK lINKS

HOT PRODUCTS

CONTACT US

   sales@wboptictech.com

   +86-21-52188985
  Room 202, 2 Floor, No.399 Jiaqian road, Jiading District, Shanghai
Copyright  Shanghai Wanbao Optical Technologies Co., Ltd.  | All Rights Reserved